Customer Comments

     Testimonials

Information

     How-To Information

     Affiliations

     Success Photos

     Spine Chart

     Videos





  Home > Clear Coatings >

Arrow Dip Clear Coating (1 ounce)
Arrow Dip Clear Coating (1 ounce)


 

Price Per Ounce
Our Price: $8.99



Sheen:


Qty:
Description
 
The Industry's Best Eco-Friendly Clear Arrow Finish

Features


  • 100% waterborne technology
  • Very low odor and no VOC
  • High-gloss finish
  • Cleans up with soap & water
This coating can be used for bow finishes and can be used with a speed coat dipper system. The more coats you apply, the glossier the finish. Or ''free dipped'' for a faster gloss, but you will have more waste. 

To achieve the proper finish when free dipping arrows, thin the clear coat with water to avoid bubbles and fish eye.

ARROWS WERE FIELD TESTED AND LEFT IN THE WEATHER FOR ONE MONTH WITH NO LIFTING/CHECKING AND FEATHERS INTACT.

Arrow pictures above show an arrow that was left outside and showed no signs of lifting, cracking or checking.  The finish and feathers are still intact.

Packaged in 1 ounce containers.  Please contact us for pricing.

Note:  True North Arrows Clear Gloss & Clear Flat Arrow & Bow Finishes are not compatible with dye base stains.

*** PLEASE NOTE***  WHEN USING NEW PRODUCTS LIKE THE TRUE NORTH ARROWS ECO-FRIENDLY CRESTING PAINTS-CROWN DIPPING PAINTS- CLEAR ARROW & BOW FINISHES& FLETCHING ADHESIVE;THERE IS A SLIGHT LEARNING CURVE TO THE PRODUCTS. THEY ARE DESIGNED TO BE USED SIMILAR  TO THE PRODUCTS OF YESTERYEAR.THESE PRODUCTS ARE THE NEXT GENERATION OF FINISHES & DESIGNED FOR THE CONSUMER  & PROFESSIONAL FOR  RESULTS. IF YOU HAVE ANY QUESTIONS PLEASE REFER TO THE INFORMATION SECTION ON THE WEB SITE OR CONTACT ME @ [email protected]

Stir the TRUE NORTH ARROW FINISH GLOSS OR Satin well, then add to the tube, Product is ready to use, pre tinned for your convience. Then I run a old shaft up and down until the CLEAR FINISH flows off with no bubbles,they will pop fast. Leave your self roomso if you need to add more water so as it runs off nicely, usually I dip 2 or 3 times, usually in a few hours 4 to 6 you can re dip. You can dip over bare shaft or stain. (just make sure your stain dries 24 hours) I LET THE LAST CLEAR COAT OVER ALL CRESTING/CROWN DIP SET 16 TO 24 HOURS BEFORE FLETCHING.

THANK YOU FOR YOUR BUSINESS.




Browse for more products in the same category as this item:

Clear Coatings
Exclusive Environmentally Safe Products